Size Range: 1/2" through 2"
Material: Malleable iron
Finish: Copper plated
Service: Recommended for suspension of non-insulated stationary copper tube.
Approvals: Complies with Federal Specification A-A-1192A (Type 12) WW-H-171-E (Type 25) and MSS-SP-69 (Type 12).

Installation:
  • Permanent installation of clamp may be made before the tubing is placed in position.
  • Final installation is attained by swinging the lower portion of the hinged clamp up under the tubing and inserting a single screw securely.
Features:
  • Hinged design provides for economical installation.
  • Designed to provide a tight fit on copper tubing.
Ordering: Specify nominal tube size, figure number, name.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Tube Size

Dimension - B

Maximum Load

Weight

N/A Extension Split Tubing Clamp (Rod Threaded) N/A 1/2 inches N/A 3/4 inches N/A 180 lbs N/A 0.10 lbs
N/A Extension Split Tubing Clamp (Rod Threaded) N/A 3/4 inches N/A 7/8 inches N/A 180 lbs N/A 0.12 lbs
N/A Extension Split Tubing Clamp (Rod Threaded) N/A 1 inches N/A 1 inches N/A 180 lbs N/A 0.14 lbs
N/A Extension Split Tubing Clamp (Rod Threaded) N/A 1 1/4 inches N/A 1 1/8 inches N/A 180 lbs N/A 0.18 lbs
N/A Extension Split Tubing Clamp (Rod Threaded) N/A 1 1/2 inches N/A 1 1/4 inches N/A 180 lbs N/A 0.22 lbs
N/A Extension Split Tubing Clamp (Rod Threaded) N/A 2 inches N/A 1 9/16 inches N/A 180 lbs N/A 0.36 lbs
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1