Products Valves Fittings Pipe & Tube HangersServices Custom Machined Parts Pipe Hangers, Pipe Rollers, and Roller Supports Styles Structural Steel
& Metal Alloys
All Categories > Pipe and Tube Hangers > Clevis and Beam Clamps > Adjustable Clevis Hanger > View Items  

Adjustable Clevis Hanger

 
Check up to five results to perform an action.


Size Range: 1/2" through 30"
Material: Carbon steel
Finish: Plain or Galvanized, also available plastic or epoxy coated
Service: Recommended for the suspension of stationary pipe lines.
Maximum Temperature: Plain 650° F, Galvanized and Epoxy 450° F
Approvals: Complies with Federal Specification A-A-1192A (Type 1), WW-H-171-E (Type 1) and MSS-SP-69 (Type 1). UL, ULC Listed and FM Approved (Sizes 3/4" through 8").
Installation: Hanger load nut above clevis must be tightened securely to assure proper hanger performance. When an oversized clevis is used, a pipe spacer should be placed over the clevis bolt as a spacer to assure that the lower U-strap will not move in on the bolt. For ductile iron pipe sizes, see Figure 590.
Adjustment: Vertical adjustment without removing pipe may be made from 3/8" through 5 1/8", varying with the size of clevis. Tighten upper nut after adjustment.

Features:
  • Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized.
  • Sizes 5" and up have rod and two nuts instead of bolt and nut; thread length on clevis rod is such that the thread locks the nuts in place, and threads are not in shear plane.
Ordering: Specify pipe size, figure number, name and finish.

Punched forming holes may be present on certain sizes of this clevis hanger. These holes are solely for the purpose of manufacturing, and do not effect the structural integrity or load carrying capacities of these hangers.

"Span" represents the maximum recommended distance between hangers on a continuous and straight run of horizontal standard weight steel pipe filled with water. In all cases, verify that chosen location of hangers does not subject hangers to a load greater than the maximum recommended load shown above.



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 21 of 21 1 

Item #

Item Name

Pipe Size

Span

Rod Size - A

Rod Take Out - E

Adjustment - F

Maximum Load
260-1/2 Adjustable Clevis Hanger 1/2 inches 7 ft. 3/8 inches 1 1/2 inches 5/8 inches 610 lbs
260-3/4 Adjustable Clevis Hanger 3/4 inches 7 ft. 3/8 inches 1 5/16 inches 5/8 inches 610 lbs
260-1 Adjustable Clevis Hanger 1 inches 7 ft. 3/8 inches 1 5/8 inches 5/8 inches 730 lbs
260-1 1/4 Adjustable Clevis Hanger 1 1/4 inches 7 ft. 3/8 inches 1 11/16 inches 5/8 inches 730 lbs
260-1 1/2 Adjustable Clevis Hanger 1 1/2 inches 9 ft. 3/8 inches 2 1/8 inches 7/8 inches 730 lbs
260-2 Adjustable Clevis Hanger 2 inches 10 ft. 3/8 inches 2 5/8 inches 1 1/8 inches 730 lbs
260-2 1/2 Adjustable Clevis Hanger 2 1/2 inches 11 ft. 1/2 inches 3 3/16 inches 1 5/16 inches 1350 lbs
260-3 Adjustable Clevis Hanger 3 inches 12 ft. 1/2 inches 4 1/16 inches 1 5/8 inches 1350 lbs
260-3 1/2 Adjustable Clevis Hanger 3 1/2 inches 13 ft. 1/2 inches 4 3/16 inches 1 13/16 inches 1350 lbs
260-4 Adjustable Clevis Hanger 4 inches 14 ft. 5/8 inches 4 1/2 inches 1 11/16 inches 1430 lbs
260-5 Adjustable Clevis Hanger 5 inches 16 ft. 5/8 inches 5 1/2 inches 1 15/16 inches 1430 lbs
260-6 Adjustable Clevis Hanger 6 inches 17 ft. 3/4 inches 5 3/4 inches 1 11/16 inches 1940 lbs
260-8 Adjustable Clevis Hanger 8 inches 19 ft. 3/4 inches 7 3/16 inches 2 inches 2000 lbs
260-10 Adjustable Clevis Hanger 10 inches 22 ft. 7/8 inches 8 7/16 inches 2 1/8 inches 3600 lbs
260-12 Adjustable Clevis Hanger 12 inches 23 ft. 7/8 inches 10 1/8 inches 2 13/16 inches 3800 lbs
260-14 Adjustable Clevis Hanger 14 inches 25 ft. 1 inches 10 11/16 inches 2 11/16 inches 4200 lbs
260-16 Adjustable Clevis Hanger 16 inches 27 ft. 1 inches 12 inches 2 3/4 inches 4600 lbs
260-18 Adjustable Clevis Hanger 18 inches 28 ft. 1 inches 13 15/16 inches 3 13/16 inches 4800 lbs
260-20 Adjustable Clevis Hanger 20 inches 30 ft. 1 1/4 inches 15 3/16 inches 3 7/8 inches 4800 lbs
260-24 Adjustable Clevis Hanger 24 inches 32 ft. 1 1/4 inches 17 5/16 inches 3 7/8 inches 4800 lbs
260-30 Adjustable Clevis Hanger 30 inches 33 ft. 1 1/4 inches 21 9/16 inches 5 1/8 inches 6000 lbs
  Results 1 - 21 of 21 1 
Copyright © 2011 Caylor Industrial Sales, All Rights ReservedSite created by ThomasNet Web Solutions and powered by Navigator Platform