Products Valves Fittings Pipe & Tube HangersServices Custom Machined Parts Pipe Hangers, Pipe Rollers, and Roller Supports Styles Structural Steel
& Metal Alloys
All Categories > Pipe and Tube Hangers > Clevis and Beam Clamps  
 

Clevis and Beam Clamps

 

Click on a Product to view details.

Adjustable Clevis Hanger

Adjustable Clevis Hanger

(21)
Size Range: 1/2" through 30"
Material: Carbon steel
Finish: Plain or Galvanized, also available plastic or epoxy coated
Service: Recommended for the suspension of stationary pipe lines.
Maximum Temperature: Plain 650° F, Galvanized and Epoxy 450° F
Approvals: Complies with Federal Specification A-A-1192A (Type 1), WW-H-171-E (Type 1) and MSS-SP-69 (Type 1). UL, ULC Listed and FM Approved (Sizes 3/4" through 8").
Installation: Hanger load nut above clevis must be tightened securely to assure proper hanger performance. When an oversized clevis is used, a pipe spacer should be placed over the clevis bolt as a spacer to assure that the lower U-strap will not move in ...
Product Image - Universal C-Type Clamp

Universal C-Type Clamp (Standard Throat)

(2)
Size Range: 3/8 and 1/2"
Material: Ductile iron, hardened steel cup point set screw and locknut.
Finish: Plain or Galvanized
Service: Recommended for use under roof installations with bar joist type construction, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 3/4".
Approvals: Complies with Federal Specification A-A-1192A (Type 19 & 23) WW-H-171-E (Type 23) and MSS-SP-69 (Type 19 & 23). UL, ULC listed and FM approved.
How to size: Size of clamp is determined by size of rod to be used.
Installation: Follow ...
Product Image - Universal C-Type Clamp (Wide Throat)

Universal C-Type Clamp (Wide Throat)

(2)
Size Range: 3/8 and 1/2"
Material: Malleable/Ductile iron clamp, hardened steel cup point set screw and locknut.
Finish: Plain and Galvanized
Service: Recommended for use under roof installations with bar joist type constructions, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 1 1/4".
Approvals: Complies with Federal Specification A-A-1192A (Type 19 & 23)WW-H-171-E (Type 23) and MSS-SP-69 (Type 19 & 23). UL, ULC listed and FM approved.
How to size: Size of clamp is determined by size of rod to be ...
Copyright © 2011 Caylor Industrial Sales, All Rights ReservedSite created by ThomasNet Web Solutions and powered by Navigator Platform