Size Range: 1/2" through 3"
Material: Malleable iron
Finish: Copper plated
Service: Recommended for suspension of non-insulated stationary copper tube. May be used with rod socket or turnbuckle adjuster
Approvals: Complies with Federal Specification A-A-1192A (Type 11) WW-H-171-E (Type 11) and MSS-SP-69 (Type 11).
Service: The split tubing ring Fig. CT-109 is used for suspension of tubing on many installations where it is necessary to specify universally adaptable parts. May be used with rod socket Fig. 110R or turnbuckle adjuster Fig. 114.
Ordering: Specify nominal tube size, figure number, name.
Material: Malleable iron
Finish: Copper plated
Service: Recommended for suspension of non-insulated stationary copper tube. May be used with rod socket or turnbuckle adjuster
Approvals: Complies with Federal Specification A-A-1192A (Type 11) WW-H-171-E (Type 11) and MSS-SP-69 (Type 11).
Service: The split tubing ring Fig. CT-109 is used for suspension of tubing on many installations where it is necessary to specify universally adaptable parts. May be used with rod socket Fig. 110R or turnbuckle adjuster Fig. 114.
Ordering: Specify nominal tube size, figure number, name.
Unit of Measure
Tube Size |
N/A 1 1/2 inches |
Bolt Size |
N/A 1/4 x 1 inches |
Dimension - C |
N/A 1 3/8 inches |
Maximum Load |
N/A 300 lbs |
Weight |
N/A 0.18 lbs |
Material |
N/A Malleable Iron |
Finish |
N/A Copper Plated |
