Size Range: 1/2" through 4"
Material: Carbon steel ring and malleable iron adjusting nut.
Finish: Copper plated
Service: Recommended for suspension of non-insulated stationary copper tube.
Approvals: Complies with Federal Specification A-A-1192A (Type 9) WW-H-171-E (Type 9) and MSS-SP-69 (Type 9).
Installation: Full load carrying capacity is reached when the rod is screwed to the bottom of the opening in the nut.

Features:
  • Large sight hole provides means of assuring thread engagement.
  • Sized for copper tubing.
  • Greater vertical adjustability.
  • Nut may be attached to rod before pipe is picked up in band and snapped into position.
  • Competitively priced.
Ordering: Specify nominal tube size, figure number, name.
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Tube Size

Rod Size - A

Dimension - B

Dimension - C

Adjustment - E

Maximum Load

N/A Adjustable Tubing Ring N/A 1/2 inches N/A 3/8 inches N/A 2 1/2 inches N/A 1 3/4 inches N/A 1 7/16 inches N/A 400 lbs
N/A Adjustable Tubing Ring N/A 3/4 inches N/A 3/8 inches N/A 2 5/8 inches N/A 1 7/8 inches N/A 1 7/16 inches N/A 400 lbs
N/A Adjustable Tubing Ring N/A 1 inches N/A 3/8 inches N/A 2 3/4 inches N/A 2 inches N/A 1 7/16 inches N/A 400 lbs
N/A Adjustable Tubing Ring N/A 1 1/4 inches N/A 3/8 inches N/A 3 inches N/A 2 1/4 inches N/A 1 9/16 inches N/A 400 lbs
N/A Adjustable Tubing Ring N/A 1 1/2 inches N/A 3/8 inches N/A 3 1/8 inches N/A 2 3/8 inches N/A 1 9/16 inches N/A 400 lbs
N/A Adjustable Tubing Ring N/A 2 inches N/A 3/8 inches N/A 3 5/16 inches N/A 2 9/16 inches N/A 1 1/2 inches N/A 400 lbs
N/A Adjustable Tubing Ring N/A 2 1/2 inches N/A 1/2 inches N/A 3 7/8 inches N/A 3 inches N/A 1 11/16 inches N/A 650 lbs
N/A Adjustable Tubing Ring N/A 3 inches N/A 1/2 inches N/A 4 1/4 inches N/A 3 3/8 inches N/A 1 13/16 inches N/A 650 lbs
N/A Adjustable Tubing Ring N/A 4 inches N/A 1/2 inches N/A 5 1/16 inches N/A 4 3/16 inches N/A 2 1/8 inches N/A 650 lbs
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1