COMPANY HEADER
Print Back
Size Range: 3/4" through 8"
Material: Malleable iron, carbon steel
Finish: Plain or Galvanized
Service: Recommended for suspension of non-insulated stationary pipe lines.
Maximum Temperature: 450° F
Approvals: Complies with Federal Specification A-A-1192A (Type 6) WW-H-171-E (Type 6) and MSS-SP-69 (Type 6).

Features:
  • Labor-saving features in installation completely outweigh slight additional cost.
  • Hanger may be installed prior to suspension of pipe.
  • Off-center hinge provides seating for pipe during installation.
  • Wedge-type locking pin is inseparably cast into hinged section, sizes 2 1/2" and larger.
  • Adjustable swivel ring is self-locking; prevents loosening due to vibration; maintains proper pitch of pipe.
  • Wire retaining ring prevents separation of swivel shank from pipe ring before installation.
Ordering: Specify pipe size, figure number, name and finish.
Unit of Measure

Specifications

Pipe Size

 N/A 1 inches

Rod Size - A

 N/A 3/8 inches

Dimension - B

 N/A 2 7/8 inches

Dimension - C

 N/A 2 1/4 inches

Dimension - D

 N/A 3 9/16 inches

Dimension - E

 N/A 1 3/4 inches

Maximum Temperature

 N/A 450 °F

Inside Diameter of Ring - F

 N/A 1 7/16 inches

Maximum Load

 N/A 300 lbs

Weight

 N/A 0.32 lbs

Material

 N/A Carbon Steel Malleable Iron

Finish

 N/A Galvanized Plain