Size Range: 3/4" through 8"
Material: Malleable iron, carbon steel
Finish: Plain or Galvanized
Service: Recommended for suspension of non-insulated stationary pipe lines.
Maximum Temperature: 450° F
Approvals: Complies with Federal Specification A-A-1192A (Type 6) WW-H-171-E (Type 6) and MSS-SP-69 (Type 6).

Features:

• Labor-saving features in installation completely outweigh slight additional cost.
• Hanger may be installed prior to suspension of pipe.
• Off-center hinge provides seating for pipe during installation.
• Wedge-type locking pin is inseparably cast into hinged section, sizes 2 1/2" and larger.
• Adjustable swivel ring is self-locking; prevents loosening due to vibration; maintains proper pitch of pipe.
• Wire retaining ring prevents separation of swivel shank from pipe ring before installation.

Ordering: Specify pipe size, figure number, name and finish.

Size Range: 1/2" through 8"
Material: Carbon steel
Finish: Galvanized
Service: Recommended for suspension of non-insulated stationary pipe line.
Maximum Temperature: 650° F
Approvals: Complies with Federal Specification A-A-1192A (Type 10) WW-H-171-E (Type 10) and MSS-SP-69 (Type 10). UL, ULC listed and FM approved (Sizes 3/4" - 8").

Features:

• Threads are countersunk so that they cannot become burred or damaged.
• Knurled swivel nut provides vertical adjustment after piping is in place.
• Captured swivel nut in the 1/2" through 3 sizes.

Ordering:
Specify size, figure number and name.
The acceptability of galvanized coatings at temperatures above 450°F is at the discretion of the end user.
Metric nuts also available upon request.