Unit of Measure

Nominal Pipe Size

N/A 1 inches

Outside Diameter - D

N/A 4.25 inches

Thickness - t

N/A 0.56 inches

O.D. of Raised Face - G

N/A 2.00 inches

Diameter at Base of Hub - X

N/A 1.94 inches

Bore - B2

N/A 1.36 inches

Length Thru Hub - T2

N/A 0.69 inches

Bolt Circle Diameter

N/A 3.12 inches

Number of Holes

N/A 4

Diameter of Holes

N/A 0.62 inches

Diameter of Bolts

N/A 1/2 inches

Machine Bolt Length (Raised Face)

N/A 2.25 inches

Stud Bolt Length (Raised Face)

N/A 2.50 inches

Stud Bolt Length (Ring Joint)

N/A 3.00 inches

Approx. Weight

N/A 0.86 kg

Approx. Weight

N/A 1.90 lbs

N/A

  • Class 150 flanges except Lap Joint will be furnished with 0.06" raised face, which is included in 'Thickness' (t) and 'Length through Hub' (T1), (T2).
  • For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees
  • Blind Flanges may be made with the same hub as that used for Slip-On Flanges or without hub.
  • The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (t).
  • Depth of Socket (Y) is covered by ANSI B16.5 only in sizes through 3 inch, over 3" is at the manufacturer's option.