Print Back
Size Range: 1/2" through 4"
Material: Carbon steel ring and malleable iron adjusting nut.
Finish: Copper plated
Service: Recommended for suspension of non-insulated stationary copper tube.
Approvals: Complies with Federal Specification A-A-1192A (Type 9) WW-H-171-E (Type 9) and MSS-SP-69 (Type 9).
Installation: Full load carrying capacity is reached when the rod is screwed to the bottom of the opening in the nut.

Features:
  • Large sight hole provides means of assuring thread engagement.
  • Sized for copper tubing.
  • Greater vertical adjustability.
  • Nut may be attached to rod before pipe is picked up in band and snapped into position.
  • Competitively priced.
Ordering: Specify nominal tube size, figure number, name.
Product Image - CT-99
Dimensional Drawing
Unit of Measure
Items Product Image - CT-99
CT-99-1/2
Adjustable Tubing Ring
Product Image - CT-99
CT-99-3/4
Adjustable Tubing Ring
Product Image - CT-99
CT-99-1
Adjustable Tubing Ring
Product Image - CT-99
CT-99-1 1/4
Adjustable Tubing Ring
Product Image - CT-99
CT-99-1 1/2
Adjustable Tubing Ring
Tube Size N/A 1/2 inches N/A 3/4 inches N/A 1 inches N/A 1 1/4 inches N/A 1 1/2 inches
Rod Size - A N/A 3/8 inches
Dimension - B N/A 2 1/2 inches N/A 2 5/8 inches N/A 2 3/4 inches N/A 3 inches N/A 3 1/8 inches
Dimension - C N/A 1 3/4 inches N/A 1 7/8 inches N/A 2 inches N/A 2 1/4 inches N/A 2 3/8 inches
Adjustment - E N/A 1 7/16 inches N/A 1 7/16 inches N/A 1 7/16 inches N/A 1 9/16 inches N/A 1 9/16 inches
Maximum Load N/A 400 lbs
Weight N/A 0.14 lbs N/A 0.15 lbs N/A 0.15 lbs N/A 0.16 lbs N/A 0.17 lbs
Material (Ring) N/A Carbon Steel
Material (Adjusting Nut) N/A Malleable Iron
Finish N/A Copper Plated