Size Range: 1/2" through 8"
Material: Carbon steel
Finish: Galvanized
Service: Recommended for suspension of non-insulated stationary pipe line.
Maximum Temperature: 650° F
Approvals: Complies with Federal Specification A-A-1192A (Type 10) WW-H-171-E (Type 10) and MSS-SP-69 (Type 10). UL, ULC listed and FM approved (Sizes 3/4" - 8").
Features:
Specify size, figure number and name.
The acceptability of galvanized coatings at temperatures above 450°F is at the discretion of the end user.
Metric nuts also available upon request.
Material: Carbon steel
Finish: Galvanized
Service: Recommended for suspension of non-insulated stationary pipe line.
Maximum Temperature: 650° F
Approvals: Complies with Federal Specification A-A-1192A (Type 10) WW-H-171-E (Type 10) and MSS-SP-69 (Type 10). UL, ULC listed and FM approved (Sizes 3/4" - 8").
Features:
- Threads are countersunk so that they cannot become burred or damaged.
- Knurled swivel nut provides vertical adjustment after piping is in place.
- Captured swivel nut in the 1/2" through 3 sizes.
Specify size, figure number and name.
The acceptability of galvanized coatings at temperatures above 450°F is at the discretion of the end user.
Metric nuts also available upon request.
Unit of Measure
Standards |
N/A NFPA |
Pipe Size |
N/A 1/2 inches |
Rod Size - A |
N/A 3/8 inches |
Dimension - B |
N/A 2 7/8 inches |
Dimension - C |
N/A 2 inches |
Dimension - F |
N/A 1 9/16 inches |
Maximum Temperature |
N/A 650 °F |
Maximum Load |
N/A 300 lbs |
Weight |
N/A 0.10 lbs |
Material |
N/A Carbon Steel |
Finish |
N/A Galvanized |
