Request Information
Unit of Measure

Nominal Pipe Size

 N/A 1 inches

Outside Diameter - D

 N/A 4.88 inches

Thickness - t

 N/A 0.69 inches

O.D. of Raised Face - G

 N/A 2.00 inches

Diameter at Base of Hub - X

 N/A 2.12 inches

Counter Bore Min. Threaded - B

 N/A 1.41 inches

Thread Length - Q

 N/A 0.69 inches

Bolt Circle Diameter

 N/A 3.50 inches

Number of Holes

 N/A 4

Diameter of Holes

 N/A 0.75 inches

Diameter of Bolts

 N/A 5/8 inches

Machine Bolt Length (Raised Face)

 N/A 2.50 inches

Stud Bolt Length (Raised Face)

 N/A 3.00 inches

Stud Bolt Length (Ring Joint)

 N/A 3.50 inches

Approx. Weight

 N/A 1.39 kg

Approx. Weight

 N/A 3.10 lbs

N/A

  • Class 300 flanges except Lap Joint will be furnished with 0.06" raised face, which is included in 'Thickness' (t) and 'Length through Hub' (T1), (T2).
  • For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees
  • Blind Flanges may be made with the same hub as that used for Slip-On Flanges or without hub.
  • The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (t).
  • Depth of Socket (Y) is covered by ANSI B16.5 only in sizes through 3 inch, over 3" is at the manufacturer's option.