Item # 300SW-1 1/2, Socket Welding On Caylor Industrial Sales, Inc.

Unit of Measure

Specifications | Features

Nominal Pipe Size	N/A 1 1/2 inches
Outside Diameter - D	N/A 6.12 inches
Thickness - t	N/A 0.81 inches
O.D. of Raised Face - G	N/A 2.88 inches
Diameter at Base of Hub - X	N/A 2.75 inches
Bore - B1	N/A 1.61 inches
Bore - B2	N/A 1.95 inches
Length Thru Hub - T2	N/A 1.19 inches
Depth of Socket - Y	N/A 0.62 inches
Bolt Circle Diameter	N/A 4.50 inches
Number of Holes	N/A 4
Diameter of Holes	N/A 0.88 inches
Diameter of Bolts	N/A 3/4 inches
Machine Bolt Length (Raised Face)	N/A 3.00 inches
Stud Bolt Length (Raised Face)	N/A 3.50 inches
Stud Bolt Length (Ring Joint)	N/A 4.00 inches
Approx. Weight	N/A 2.62 kg
Approx. Weight	N/A 5.80 lbs

N/A

Class 300 flanges except Lap Joint will be furnished with 0.06" raised face, which is included in 'Thickness' (t) and 'Length through Hub' (T1), (T2).
For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees
Blind Flanges may be made with the same hub as that used for Slip-On Flanges or without hub.
The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (t).
Depth of Socket (Y) is covered by ANSI B16.5 only in sizes through 3 inch, over 3" is at the manufacturer's option.

Nominal Pipe Size