Item # AP075-SR, Durair II Pneumatic Actuator On Caylor Industrial Sales, Inc.

Products Valves Fittings Pipe & Tube HangersServices Custom Machined Parts Pipe Hangers, Pipe Rollers, and Roller Supports Styles Structural Steel
& Metal Alloys


All Categories > Actuators > Pneumatic Actuators > Durair II Pneumatic Actuators > Item # AP075-SR


	Item # AP075-SR, Durair II Pneumatic Actuator

Extended Cycle Life
(1 million cycles)

Low Friction Bearings
Polished Bore
Precision Machined Gears
Epoxy Coated Springs
Dry or Lubricated Air

Exterior Coatings

Tested to ASTM B117-73 (500 hrs. salt spray)
Anodized body (ASTM 6063) or nickel plated
End covers; epoxy-polyester coated or nickel plated

Mounting Styles

NAMUR dimensions for accessories
ISO dimensions for valve mounting
Shaft variations available for direct mounting
Female star drive output shaft
Independent travel stops ±4º each direction

Safety

Precompressed spring cartridge
Blowout proof shaft
Visual indicator

Specifications

Operating Pressure: 40 to 120 psig
Temperature (normal operating): - 4º F to 180º F
Media: Dry or lubricated air;

non-corrosive and inert gas;
light hydraulic oil

Lubrication: Factory lubricated for normal lifetime
Rotation: 90º

larger image

larger image

Specifications

Open Speed		0.7 sec

Close Speed		1.0 sec

Accessories		Limit Switch Positioner Solenoid Valve

Body (No. 1)		Extruded Aluminum Alloy (ASTM 6063T6) Qty. 1

Piston (No. 2)		Aluminum Alloy (Die Cast) (ASTM B179) Qty. 2

End Cover (No. 3)		Aluminum Alloy (Die Cast) (ASTM B179) Qty. 2

Pinion (No. 4)		Steel (Nickel Plated) (ASTM A105) Qty. 1

Key (Pinion Anti Ejection) (No. 5)		Nylon Qty. 2

O-Ring (Pinion, bottom) (No. 6)		Nitril (NBR) Qty. 1

O-Ring (Pinion, top) (No. 7)		Nitril (NBR) Qty. 1

Retaining Ring (No. 10)		Spring Steel Qty. 1

Spring Cartridge (No. 11)		High Alloy Spring Steel Qty. 12 max.

O-Ring (Piston) (No. 12)		Nitrile (NBR) Qty. 2

Piston Bearing (No. 13)		Acetal Resin (LAT LUB 731 320AT +20% PTFE) Qty. 2

Cover Gasket (No. 14)		Nitrile (NBR) Qty. 2

Nameplate (No. 15)		Aluminum Qty. 1

Cap Screw (No. 16)		Stainless Steel (18-8) Qty. 8

Nut (End Stop) (No. 17)		Stainless Steel (18-8) Qty. 4

Washer (No. 18)		Stainless Steel (18-8) Qty. 4

O-Ring (End Stop) (No. 19)		Nitrile (NBR) Qty. 4

Screw (End Stop) (No. 21)		Stainless Steel (18-18) Qty. 2

Thrust Washer (Pinion) (No. 23)		Stainless Steel (18-8) Qty. 1

Thrust Bearing (No. 24)		Nylon Qty. 1

Bearing (Pinion, Bottom) (No. 25)		Nylon Qty. 1

Bearing (Pinion, Top) (No. 26)		Nylon Qty. 1

Bearing (Piston) (No. 27)		Nylon Qty. 2

Screw (Piston Stop) (No. 28)		Stainless Steel (18-8) Qty. 2

Weight		7.4 lbs

Note		All are factory installed and tested to manufacturer's specification.

MORE IMAGES


	· Torque Rating - Double Acting

	· Operation

	· Spring Arrangement

	· Torque Rating - Spring Return

	· Dimensional Information

DOWNLOADS


		Duravalve Manual and Actuated Valves (PDF, 278KB)

Item # AP075-SR, Durair II Pneumatic Actuator

Open Speed

Close Speed

Accessories

Body (No. 1)

Piston (No. 2)

End Cover (No. 3)

Pinion (No. 4)

Key (Pinion Anti Ejection) (No. 5)

O-Ring (Pinion, bottom) (No. 6)

O-Ring (Pinion, top) (No. 7)

Retaining Ring (No. 10)

Spring Cartridge (No. 11)

O-Ring (Piston) (No. 12)

Piston Bearing (No. 13)

Cover Gasket (No. 14)

Nameplate (No. 15)

Cap Screw (No. 16)

Nut (End Stop) (No. 17)

Washer (No. 18)

O-Ring (End Stop) (No. 19)

Screw (End Stop) (No. 21)

Thrust Washer (Pinion) (No. 23)

Thrust Bearing (No. 24)

Bearing (Pinion, Bottom) (No. 25)

Bearing (Pinion, Top) (No. 26)

Bearing (Piston) (No. 27)

Screw (Piston Stop) (No. 28)

Weight

Note