Item # 104-8, Adjustable Swivel Ring, Split Ring Type On Caylor Industrial Sales, Inc.

Products Valves Fittings Pipe & Tube HangersServices Custom Machined Parts Pipe Hangers, Pipe Rollers, and Roller Supports Styles Structural Steel
& Metal Alloys


All Categories > Pipe and Tube Hangers > Pipe Rings > Adjustable Swivel Ring, Split Ring Type > Item # 104-8


	Item # 104-8, Adjustable Swivel Ring, Split Ring Type

Size Range: 3/4" through 8"
Material: Malleable iron, carbon steel
Finish: Plain or Galvanized
Service: Recommended for suspension of non-insulated stationary pipe lines.
Maximum Temperature: 450° F
Approvals: Complies with Federal Specification A-A-1192A (Type 6) WW-H-171-E (Type 6) and MSS-SP-69 (Type 6).

Features:

Labor-saving features in installation completely outweigh slight additional cost.
Hanger may be installed prior to suspension of pipe.
Off-center hinge provides seating for pipe during installation.
Wedge-type locking pin is inseparably cast into hinged section, sizes 2 1/2" and larger.
Adjustable swivel ring is self-locking; prevents loosening due to vibration; maintains proper pitch of pipe.
Wire retaining ring prevents separation of swivel shank from pipe ring before installation.

Ordering: Specify pipe size, figure number, name and finish.

Product Image - Adjustable Swivel Ring, Split Ring Type

larger image

larger image

Specifications

Pipe Size		8 inches

Rod Size - A		7/8 inches

Dimension - B		9 1/8 inches

Dimension - C		4 7/8 inches

Dimension - D		13 1/2 inches

Dimension - E		3 7/8 inches

Maximum Temperature		450 °F

Inside Diameter of Ring - F		9 1/16 inches

Maximum Load		1800 lbs

Weight		6.10 lbs

Material		Carbon Steel Malleable Iron

Finish		Galvanized Plain

Item # 104-8, Adjustable Swivel Ring, Split Ring Type

Pipe Size

Rod Size - A

Dimension - B

Dimension - C

Dimension - D

Dimension - E

Maximum Temperature

Inside Diameter of Ring - F

Maximum Load

Weight

Material

Finish