Caylor Industrial Sales
Caylor Industrial Sales
2101 East Morris Street
PO Box 4659
Dalton, Georgia 30721

Phone: 706-226-3198
Fax: 706-278-4104
Email: heath@caylorindustrial.com
Website: www.caylorindustrial.com
Print Back
The Bray Series 70 Electric Actuator provides a rugged, compact industrial actuator solution to a wide range of quarter turn applications including butterfly valves, ball valves, and dampers. Available in torque outputs from 600 to 18,000 lb.in. (68 to 2033 Nm), these actuators mount directly to Bray and other industry standard butterfly valves without the need for brackets and linkages. The manual declutchable override handwheel is standard on all Bray Series 70 actuators, providing end user convenience in installation, commissioning and service.

On/Off and modulating models are available in 24, 110 and 220 VAC. The standard enclosure is NEMA 4x and IP65 rated with an industrial polyester finish, making the Series 70 the ideal choice for cooling tower valves and other outdoor applications. The advanced Servo Pro modulating control card assures compatibility with virtually any analog control signal used in today’s building automation and temperature control systems.

Features
  • Compact design and direct mounting
  • UL, CSA and CE approved (most models)
  • High visibility beacon position indicator
  • Internal isolation relays
  • Manual declutchable override handwheel
  • Advanced Servo Pro modulating option
  • Optional battery backup on 24 VAC models
Benefits
  • Fits in tight spaces, installs easily
  • Assures universal application acceptability
  • Assists in field operation
  • Allows parallel wiring of multiple actuators from a single control output
  • Allows manual positioning without disconnecting power
  • Provides on-board diagnostics and user adjustable options including control signal type, speed controls and other features.
  • Assures return to a predetermined position upon loss of power supply
Specifications

Industrial electric actuators shall include manual declutchable override handwheel and high visibility position indication. Motors shall be continuous duty. Enclosure shall be NEMA 4X, IP 65 rated. Actuator shall conform to ISO 5211 standards for direct mounting onto quarter turn valves. On/Off actuators shall be equipped with internal isolation relays to allow parallel wiring of multiple units. Modulating actuators shall be equipped with a microprocessor-based servo control with on-board diagnostics. Actuator shall be UL, CSA and CE approved. Actuators shall be Bray Series 70 or approved equal.
Unit of Measure

Specifications

Voltage

 N/A 24 VAC

Torque Output

 N/A 2000 in·lbs
Features1 N/A 24 VAC Aux. Switches Heater On/Off

Stroke Time

 N/A 60 sec

Full Load Current Draw

 N/A 2.0 A

Motor Duty Cycle

 N/A Continuous Duty

Aux Switches (Two SPDT)

 N/A 10A (1/2 HP) at 220 VAC 10A (1/3 HP) at 120 VAC

Heater (Optional)

 N/A 5 Watt, PTC style, self regulating

Servo (Modulating Models)

 N/A Control Input - 0 to 10 VDC, 2 to 10 VDC, 0 to 5 VDC, 4 to 20 mA Input Impedance - Voltage: 1000K Ohms; Current: 250 Ohms

Housing

 N/A Die Cast Aluminum, Polyester Finish NEMA 4X, IP 65

Conduit Entries (2)

 N/A 70-0061, 1/2" NPT All Other Models, 3/4" NPT

Terminal Strip

 N/A 12 to 22 AWG

Ambient Temperature

 N/A -20 to 150 ºF-29 to 65 ºC

Agency Listings (120V)

 N/A UL, CE, CSA

Note

 N/A The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the nearest Bray office. Bray controls shall not be liable for damages resulting from misapplication or misuse of its products.
  • 1 Use Series 70 actuators only to control equipment under normal operating conditions. Where failure or malfunction of the electric actuator could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the control system. Incorporate and maintain other devices, such as supervisory or alarm systems or safety or limit controls, intended to warn of or protect against failure or malfunction of the electric actuator.