Caylor Industrial Sales
Caylor Industrial Sales
2101 East Morris Street
PO Box 4659
Dalton, Georgia 30721

Phone: 706-226-3198
Fax: 706-278-4104
Email: heath@caylorindustrial.com
Website: www.caylorindustrial.com
Print Back
Cast Iron for Horizontal Installation
For Pressures to 250 psig (17 bar)...Capacities to 4,400 lb/hr (2,000 kg/hr)

The most reliable steam trap known-the inverted bucket-provides efficient condensate drainage of virtually all types of steam-using equipment. Put the inverted bucket to work in a tough cast iron package, and you have the best of both worlds. Because they operate efficiently for longer periods of time, Armstrong cast iron inverted buckets add solid energy savings to lower replacement/labor costs. All Armstrong cast iron inverted bucket steam traps are repairable for even bigger maintenance savings.

A unique leverage system multiplies the force provided by the bucket to open the valve against system pressure. The mechanism is free-floating, and has no fixed pivots to create wear or friction.

Because the mechanism is located at the top of the trap, no dirt can collect on the orifice. Small particles of dirt are held in suspension until discharged by the full differential purging action when the bucket sinks, pulling the valve off the seat.

The discharge orifice is surrounded by a water seal, preventing live steam loss. Automatic air venting is provided by a small vent hole in the bucket, which provides continuous automatic air and CO2 venting at steam temperature.

Inverted bucket traps drain continuously, although discharging intermittently, allowing no condensate backup. They are also resistant to water hammer.

Specification

Inverted bucket steam trap, type ... in cast iron, with continuous air venting at steam temperature, free-floating stainless steel mechanism, and discharge orifice at the top of the trap.
Unit of Measure

Specifications

Connections

 N/A Screwed NPT and BSPT

Body

 N/A ASTM A48 Class 30

Internals

 N/A All stainless steel-304

Valve and Seat

 N/A Hardened chrome steel-17-4PH

Test Plug Material

 N/A Carbon steel

Maximum Allowable Pressure at 450ºF (Vessel Design)

 N/A 250 psig

Maximum Allowable Pressure at 232ºC (Vessel Design)

 N/A 17 bar

Maximum Operating Pressure

 N/A 250 psig17 bar

Capacity

 N/A 4400 lb/hr2000 kg/hr

Pipe Connections

 N/A 1 in1/2 in3/4 in15 mm20 mm25 mm

Test Plug

 N/A 1/4 in6 mm

Flange Diameter - A

 N/A 3 3/4 in95.2 mm

Height - B

 N/A 6 7/8 in175 mm

Face-to-Face - C

 N/A 5 in127 mm

Bottom to C inlet - D

 N/A 4 1/4 in108 mm

No. of Bolts

 N/A 6

Options

 N/A Probe connection Scrub Wire Stainless Steel Internal Check Valve Stainless Steel Pop Drain Thermic Vent Bucket Thermo Drain

Weight

 N/A 6 lbs2.7 kg

Note

 N/A Designs, materials, weights and performance ratings are approximate and subject to change without notice.