Flanged Ball Valves On Caylor Industrial Sales, Inc.

Products Valves Fittings Pipe & Tube HangersServices Custom Machined Parts Pipe Hangers, Pipe Rollers, and Roller Supports Styles Structural Steel
& Metal Alloys


All Categories > Valves > Flanged Ball Valves


	Flanged Ball Valves

	Click on a Product to view details.


		Model 711F Class 125 Globe Valve (8) The Apollo Model 711F Flanged Cast Iron Globe valve provides efficient throttling capabilities. The Apollo Globe valve can reliably be installed in most plumbing and heating systems (or building service piping). Features Compatible with ANSI 125# & 150# Flanges Full Port Bronze Mounted Seat Rings Positive Shut-off Throttling Capabilities Adjustable Graphite Stem Packing Outside Screw & Yoke Flanged Connection Bolted Bonnet Rugged Iron Hand Wheel Back Seat Protection Standards MSS SP-85, "Gray Iron Globe & Angle Valves Flanged and Threaded Ends" ASME B16.10, "Face-to-Face and End-to-End Dimensions of ...




		Model 610F Class 125 Gate Valve (14) The Apollo Model 610F Flanged Cast Iron Gate valve provides full flow capabilities. The Apollo Gate valve can reliably be installed in most plumbing and heating systems (or building service piping). Features Compatible with ANSI 125# & 150# Flanges Full Port Bronze Mounted Seat Rings Solid Wedge Adjustable Graphite Stem Packing Non-Rising Stem Flanged Connection Bolted Bonnet Rugged Iron Hand Wheel Back Seat Protection Standards MSS SP-70, "Gray Iron Gate Valves Flanged and Threaded" ASME B16.10, "Face-to-Face and End-to-End Dimensions of Valves" Performance Rating Saturated Steam: 125 psi (8.6 ...




		Merit Brass ASME Class 150 Flanged End Ball Valve (11) 2 - PC Body, Flanged End Ball Valve, Full Port Design Features: Built-in ISO 5211 Mounting Pad for Easy Automation Anti-Static Devices for Ball-Stem-Body Blow-out Proof Stem Pressure Balance Hole in Ball Slot Casting Boss on Body for Draining Applicable Standards: Design: ASME B16.34, API 608 Face to Face: ASME B16.10 Wall Thickness: ASME B16.34 End Flange: ASME B16.5 Inspection & Testing : API 598




		Merit Brass ASME Class 300 Flanged End Ball Valve (11) 2 - PC Body, Flanged End Ball Valve, Full Port Design Features: Built-in ISO 5211 Mounting Pad for Easy Automation Anti-Static Devices for Ball-Stem-Body Blow-out Proof Stem Pressure Balance Hole in Ball Slot Casting Boss on Body for Draining Applicable Standards: Design: ASME B16.34, API 608 Face to Face: ASME B16.10 Wall Thickness: ASME B16.34 End Flange: ASME B16.5 Inspection & Testing : API 598




		Model 950XLT - Top Access Double Check Valve Assembly Application Designed for installation on potable water lines to protect against both back siphonage and backpressure of polluted water into the potable water supply. A tethered test cock cap is provided to protect against fouling caused by insects, dirt and debris. Assembly shall provide protection where a potential non-health hazard exists. Standards Compliance (Unless otherwise noted, applies to 3/4" thru 2" Horizontal) ASSE® Listed 1015 (Vertical flow-up:1 1/4" thru 2") IAPMO® Listed AWWA Compliant C510 CSA® Certified (Vertical flow-up:1 1/2" & 2") NYC MEA 426-89-M VOL 3 Approved by the Foundation for Cross Connection Control and Hydraulic Research at the ...

Flanged Ball Valves

Model 711F Class 125 Globe Valve

Model 610F Class 125 Gate Valve

Merit Brass ASME Class 150 Flanged End Ball Valve

Merit Brass ASME Class 300 Flanged End Ball Valve

Model 950XLT - Top Access Double Check Valve Assembly